升降平臺http://www.obuirnu.cn/采用高強度錳鋼鉅形管制作，設有防止升降機超載的安全保護裝置，設有防止液壓管路破裂的安全保護閥，設有停電情況下的應急下降裝置，在平臺長度不足時可延伸至所需位置，從而提高工作效率。下面濟南悅翔機械制造的專家給大家詳細分析一下升降平臺重要部件如何保養？

1、升降平臺都是由動力單元和油缸控制的，動力單元在生產時設有四個出孔，可調節大小，同時通過調整馬達速度或電液比例閥來調整液壓油的流量大小，油缸尺寸，在滿足設計要求的情況下，盡可能的減小油缸尺寸。油缸尺寸越小，上升速度越快，一次性運送貨物的量不能過重，在達到升降平臺運送貨物的最佳值時就可以了，這樣才能保障升降平臺的速度正常運行。
Lifting platform is controlled by the power unit and the oil cylinder, power unit in the production is provided with four out of the hole, can adjust the size, at the same time through adjust motor speed or electro-hydraulic proportional valve to adjust the flow quantity of the hydraulic oil, cylinder size, to meet the design requirements, as far as possible to reduce cylinder size. The smaller the size of the cylinder, rising faster, one-time delivery of goods the quantity can not be too heavy, reached the lifting platform for the carriage of the goods to the optimal values can, so as to guarantee the speed and normal operation of the lifting platform.

2、升降平臺各機構的制動器應經常進行檢查和調整制動瓦和制動輪的間隙，保證靈活可靠。在摩擦面上，不應有污物存在，遇有污物必須用汽油或稀料洗掉，減速箱、變速箱、外嚙合齒輪等各部分的潤滑以及液壓油均按潤滑表中的要求進行。經常檢查升降平臺所有的電線、電纜有無損傷，要及時的包扎和更換以損傷的部分。
The brake of the lifting platform should always check and adjust the clearance between the brake pad and the brake wheel to ensure the flexibility and reliability. On the friction surface, there should be no dirt. In case of pollutants must be gasoline or thinner wash, gear box, gear box, external meshing gear lubrication and hydraulic oil were carried out according to the lubrication chart. Often check the lifting platform all the wires, cables, there is no damage, to timely dress up and replace the damaged part.

3、升降平臺http://www.obuirnu.cn/系統在常壓常溫下液壓油中含有容積比為6~8%的空氣，當壓力降低時空氣會從油中游離出來，氣泡破裂使液壓元件"氣蝕"，產生噪聲，合理使用和維護升降平臺，既能提高生產效率，也可以節約成本，在日常的使用過程中我們要格外注意升降平臺的保養和維護。
System of the lifting platform under the normal temperature and pressure, hydraulic oil containing volume than for 6 ~ 8% of the air, when the pressure is reduced temporal gas will from the oil free bubble burst, so that the hydraulic components "cavitation", produce noise, reasonable use and maintenance of the lifting platform, both to improve production efficiency, also can save the cost, in the daily use process we should pay particular attention to the maintenance of the lifting platform and maintenance.